home *** CD-ROM | disk | FTP | other *** search
- Path: rapidnet.com!wblock
- From: wblock@rapidnet.com (Warren Block)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: 2091 diode replacement.
- Date: 17 Jan 1996 18:15:18 GMT
- Organization: RapidNet
- Message-ID: <4djebm$bau@rapidnet.com>
- References: <17708D53S86.WALLY@ukcc.uky.edu>
- NNTP-Posting-Host: rapidnet.com
- X-Newsreader: TIN [version 1.2 PL2]
-
- Walter R Francis (WALLY@ukcc.uky.edu) wrote:
- : I was replacing a hard drive on my 2091 and somehow broke the diode that is
- : between the SCSI connector and the SCSI terminators. It's a single diode all
- : by itself. I replaced it with a diode I had in a baggie of spare parts from
- : other things.
- :
- : If someone could tell me what type and specifications the original diode had
- : I would appreciate it. I believe the drive has been acting funny, and would
- : feel better to have the correct type of diode in there.
-
- It looks like a 1N914 or 1N4148, but I always did get those mixed up.
- Presumably this is a protection diode for termpower, so be sure you got
- the replacement in the right way (as per the silkscreen, cathode toward
- the bottom of the board).
-
- --
- .----------------------------------------------------------------.
- | Warren R. Block * New EMail Address: wblock@rapidnet.com |
- | Rapid City SD USA * Brought to you in majestic INEMASCOP! |
- `----------------------------------------------------------------'
-